EVDC-BABA Series

BABA-COMPLIANT DC FAST CHARGING STATIONS - Fully compliant with Buy America Build America (BABA), supporting U.S. infrastructure initiatives without sacrificing quality or performance.

EVDC-BABA Series CHARGERS

EVESCO’s BABA-compliant electric vehicle chargers don’t just meet technical standards-they unlock strategic advantages. By satisfying domestic content requirements, they open the door to billions in federal, state, and clean energy funding. Certified systems streamline approvals and eliminate sourcing delays, making public procurement faster and more predictable. With visible alignment to federal priorities, these chargers provide your bid with a clear competitive edge when pursuing public contracts.

Models – Click HereArrow green Down

  • Scalable DC fast charging stations with configurable outputs ranging from 80 kW to 240 kW
  • BABA-compliant manufacturing supports U.S. infrastructure goals without sacrificing charger performance or durability
  • Delivers up to 350A continuously, enabling ultra-fast charging speeds without compromising safety or reliability
  • Wide 200-1000 Vdc output range ensures compatibility with both current and future EV battery platforms
  • Fully certified for public billing with CTEP and NTEP standards for accurate, compliant energy metering
  • Supports multiple start-up modes, including RFID, QR code, OCPP, and optional credit card readers
  • Offer flexible cable configurations, including CCS1 and NACS dual connectors
  • ADA-compliant design ensures barrier-free cable reach and user interface accessibility for all installations
  • Modular power design allows scalable upgrades in 40 kW steps to meet growing demand.

BABA-COMPLIANT EV CHARGING STATIONS BUILT FOR AMERICA

EVESCO’s BABA-compliant DC fast chargers are engineered for sustained performance, certified for public use, and offer long-term flexibility. From urban curbside installs to high-volume fleet hubs, each unit delivers maximum uptime, full ADA and CTEP/NTEP compliance, and future-proof compatibility with evolving EV standards, all built to meet today’s EV charging infrastructure demands and tomorrow’s scale.

Available in configurations from 80 kW to 240 kW, EVESCO EV chargers can be adapted as your energy needs evolve. Modular architecture allows you to add power modules without major overhauls, while broad voltage compatibility (200-1000 Vdc) ensures support for both current 400-volt EVs and next-generation 800-volt and higher platforms. With flexible start-up modes and CCS1 and NACS connector options, these DC fast chargers simplify installation and maximize site utilization. Their NEMA 3R, IK10-rated enclosures and ADA-compliant design make them ideal for rugged, accessible, behind-the-fence or public-facing environments

You need a price? A quote? Or have a questions? Click Here

.01

EVDC-120NA-BABA

120 KW DC fast charging station

Description:

The EVESCO EVDC-120NA-BABA is a 120 KW DC fast charging station engineered for reliability, flexibility, and future scalability. Designed for 480V…

Specification:

  • Output Power: 120kW (can
  • split power)
  • Upgradeable to: 160 kW
  • Output Current: 350A
  • Supply Input: 480VAC / 60Hz
  • Socket Type: Dual port CCS1 or NACS or CCS1 + NACS

.02

EVDC-160NA-BABA

160 KW DC fast charging station

Description:

The EVESCO EVDC-160NA-BABA is a 160 KW DC fast charging station engineered for high-demand public, commercial, and fleet applications. Powered by a….

Specifications:

  • Output Power: 160kW (can split power)
  • Output Current: 350A
  • Supply Input: 480VAC / 60Hz
  • Socket Type: Dual port CCS1 or NACS or CCS1 + NACS

.03

EVDC-160UNA-BABA

160 KW EV charging station

Description:

The EVESCO EVDC-160U-NA-BABA is a 160 KW EV charging station designed for high-throughput environments like fleet hubs, public installations, and…

Specification:

  • Output Power: 160KW (can split power)
  • Upgradeable to: 240 kW
  • Output Current: 350A
  • Supply Input: 480VAC / 60Hz
  • Socket Type: Dual port CCS1 or NACS or CCS1 + NACS

.04

EVDC-200NA-BABA

200 KW DC fast charging station

Description:

The EVESCO EVDC-200NA-BABA is a 200 KW DC fast charging station purpose-built for demanding use cases such as fleet depots, commercial properties ,…

Specifications:

  • Output Power: 200kW (can split power)
  • Upgradeable to: 240 kW
  • Output Current: 350A
  • Supply Input: 480VAC / 60Hz
  • Socket Type: Dual port CCS1 or NACS or CCS1 +

.05

EVDC-24ONA-BABA

240 KW DC fast charging station

Description:

The EVESCO EVDC-2400NA-BABA is a 240 KW DC fast charging station engineered for high-demand public, commercial, and fleet applications. Powered by a…

Specifications:

  • Output Power: 240kW (can split power)
  • Output Current: 350A
  • Supply Input: 480VAC / 60Hz
  • Socket Type: Dual port CCS1 or NACS or CCS1 + NACS

.06

EVDC-8ONA-BABA

80 KW DC fast charging station

Description:

The EVESCO EVDC-80NA-BABA is an 80 KW DC fast charging station that offers a flexible entry point for public, commercial, and fleet EV charging…

Specifications:

  • Output Power: 80kW (can split power)
  • Upgradeable to: 160 kW
  • Output Current: 350A
  • Supply Input: 480VAC / 60Hz
  • Socket Type: Dual port CCS1 or NACS or CCS1 + NACS

EVDC-BABA Series

Models Detail

You need a price? A quote? Or have a questions? Click Here

EVDC-120NA-BABA

EVDC-BABA Series

The EVESCO EVDC-120NA-BABA is a 120 kW DC fast charging station engineered for reliability, flexibility, and future scalability. Designed for 480V input, it delivers continuous high-output performance to support ultra-fast charging across CCS1 and NACS connectors. This unit meets CTEP/NTEP certification and ADA compliance, making it ideal for public charging installations, commercial facilities, and fleet depots seeking dependable infrastructure built to national standards. Whether you're deploying at scale or building a resilient charging network, the EVDC-120NA-BABA offers a future-proof solution with the flexibility to expand to 160 kW as demand grows. What makes the EVDC-120NA-BABA stand out is its modular, upgrade-ready architecture. Starting at 120 kW, it can be expanded to 160 kW by simply adding a 40kW power module, no major electrical upgrades or infrastructure changes required. Most importantly, it's a fully BABA compliant EV charger, qualifying projects for federal infrastructure funding, tax incentives, and clean energy programs. That translates to reduced procurement friction, faster project approvals, and a decisive advantage when competing for public-sector contracts.

Model Number: EVDC-120NA-BABA

  • 120 KW DC fast charging station, scalable up to 160 kW
  • BABA-compliant construction qualifies for federal funding and supports U.S. manufacturing priorities
  • Delivers up to 350A of continuous current for fast, reliable EV charging performance
  • 200-1000 Vdc output range supports both 400V and 800V+ EV architectures
  • Certified to CTEP and NTEP standards for accurate public energy metering and billing
  • Available with CCS1, NACS, or dual-connector configurations for broad EV compatibility
  • Enables user access via RFID, QR code, OCPP, or optional credit card reader
  • 60Hz, 480VAC supply input (three-phase)

Model Number: EVDC-120NA-BABA

  • Output Power: 120kW
  • Output Voltage: 200-1000V
  • Output Current: 350A (0 – 350A variable range)
  • Supply Input: 480VAC three-phase / 60Hz
  • Socket Type: Dual port CCS1 or NACS or CCS1 + NACS
  • Network Connections: LAN, 4G, Wi-Fi
  • Communication: OCPP1.6
  • Start Modes: Plug-n-play, RFID, OCPP and optional POS
  • Display: 15 inches LCD touchscreen

Dimensions

  • Width: 22.8″ / 580mm
  • Depth: 33.5″ / 850mm
  • Height: 74.8″ / 1900mm

EVDC-160NA-BABA

EVDC-BABA Series

The EVESCO EVDC-160NA-BABA is a 160 kW DC fast charging station engineered for high-demand public, commercial, and fleet applications. Powered by a 480V three-phase input, it delivers sustained high-output charging via CCS1 and NACS connectors, supporting both current and next-generation EV platforms. Fully certified to CTEP/NTEP standards and ADA-compliant, it meets strict national requirements for public accessibility and billing accuracy. With intelligent power distribution, the EVDC-160NA-BABA can simultaneously charge two vehicles at up to 80 kW each, maximizing site throughput and improving ROl without compromising performance. What sets the EVDC-160NA-BABA apart is it delivers full BABA compliant EV charging, making it an ideal fit for federally funded infrastructure projects. Built to meet the requirements of the Build America, Buy America Act, this 160 kW DC fast charger qualifies for federal grants, tax credits, and clean energy incentives. By using U.S. sourced and assembled components, it streamlines public procurement, accelerates project timelines, and strengthens your position in competitive government bids, without compromising on charging performance or reliability.

Model Number: EVDC-160NA-BABA

  • 160 kW DC fast charging station with dual-connectors and cable-management
  • BABA-compliant construction qualifies for federal funding and supports U.S. manufacturing priorities
  • Delivers up to 350A of continuous current for fast, reliable EV charging performance
  • 200-1000 Vdc output range supports both 400V and 800V+ EV architectures
  • Certified to CTEP and NTEP standards for accurate public energy metering and billing
  • Available with CCS1, NACS, or dual-connector configurations for broad EV compatibility
  • Enables user access via RFID, QR code, OCPP, or optional credit card reader
  • 60Hz, 480VAC supply input (three-phase)

Model Number: EVDC-160NA-BABA

  • Output Power: 160kW
  • Output Voltage: 200-1000V
  • Output Current: 350A (0 – 350A variable range)
  • Supply Input: 480VAC three-phase / 60Hz
  • Socket Type: Dual port CCS1 or NACS or CCS1 + NACS
  • Network Connections: LAN, 4G, Wi-Fi
  • Communication: OCPP1.6
  • Start Modes: Plug-n-play, RFID, OCPP and optional POS
  • Display: 15 inches LCD touchscreen

Dimensions

Width: 22.8″ / 580mm

Depth: 33.5″ / 850mm

Height: 74.8″ / 1900mm

EVDC-160UNA-BABA

EVDC-BABA Series

The EVESCO EVDC-160U-NA-BABA is a 160 kW EV charging station designed for high-throughput environments like fleet hubs, public installations, and commercial EV charging. Operating on 480V input, it delivers continuous high-output charging through CCS1 and NACS connectors, with full ADA and CTEP/NTEP compliance for public accessibility and billing accuracy. Its rugged NEMA 3R, IK10-rated enclosure ensures durability across both public-facing and behind-the-fence deployments. What sets this unit apart is its upgrade-ready modular architecture. Starting at 160 kW, the charging station can be expanded to 240 kW by simply adding 40 kW power modules, no major rework required. As a fully BABA-compliant electric vehicle charger, it's qualified for federal infrastructure grants, tax incentives, and clean energy funding. That means faster procurement cycles, simplified approvals, and a clear advantage when competing for public-sector EV charging contracts

Model Number: EVDC-160UNA-BABA

  • Modular EV charging station starting at 160 kW, scalable up to 240 kW as needed
  • BABA-compliant construction qualifies for federal funding and supports U.S. manufacturing priorities
  • Delivers up to 350A of continuous current for fast, reliable EV charging performance
  • 200-1000 Vdc output range supports both 400V and 800V+ EV architectures
  • Certified to CTEP and NTEP standards for accurate public energy metering and billing
  • Available with CCS1, NACS, or dual-connector configurations for broad EV compatibility
  • Enables user access via RFID, QR code, OCPP, or optional credit card reader 60Hz, 480VAC supply input (three-phase)

Model Number: EVDC-160UNA-BABA

  • Output Power: 160kW
  • Output Voltage: 200-1000V
  • Output Current: 350A (0 – 350A variable range)
  • Supply Input: 480VAC three-phase / 60Hz
  • Socket Type: Dual port CCS1 or NACS or CCS1 + NACS
  • Network Connections: LAN, 4G, Wi-Fi
  • Communication: OCPP1.6
  • Start Modes: Plug-n-play, RFID, OCPP and optional POS
  • Display: 15 inches LCD touchscreen

Dimensions

  • Width: 33.5″ / 850mm
  • Depth: 29.5″ / 750mm
  • Height: 78.7″ / 2000mm

You need a price? A quote? Or have a questions? Click Here

EVDC-200NA-BABA

EVDC-BABA Series

The EVESCO EVDC-200NA-BABA is a 200 kW DC fast charging station purpose-built for demanding use cases such as fleet depots, commercial properties, and high-traffic public charging sites. Powered by a 480V input, it delivers consistent, high-output charging through CCS1 and NACS connectors. With full ADA and CTEP/NTEP certification, it ensures accessibility and public billing compliance, while its NEMA 3R, IK10-rated enclosure is engineered to withstand harsh operating conditions, whether installed roadside, in parking structures, or behind the fence. What sets this unit apart is its upgrade-ready modular architecture. Starting at 200 kW, the charging station can be expanded to 240 kW by simply adding a 40 kW power module, no major rework required. As a fully BABA-compliant EV charger, it's qualified for federal infrastructure grants, tax incentives, and clean energy funding. That means faster procurement cycles, simplified approvals, and a clear advantage when competing for public-sector EV charging contracts.

  • 200 kW modular EV charging station starting, scalable up to 240 kW
  • BABA-compliant construction qualifies for federal funding and supports U.S. manufacturing priorities
  • Delivers up to 350A of continuous current for fast, reliable EV charging performance
  • 200-1000 Vdc output range supports both 400V and 800V+ EV architectures
  • Certified to CTEP and NTEP standards for accurate public energy metering and billing
  • Available with CCS1, NACS, or dual-connector configurations for broad EV compatibility
  • Enables user access via RFID, QR code, OCPP, or optional credit card reader
  • 60Hz, 480VAC supply input (three-phase)

Model Number: EVDC-200NA-BABA

  • Output Power: 200kW
  • Output Voltage: 200-1000V
  • Output Current: 350A (0 – 350A variable range)
  • Supply Input: 480VAC three-phase / 60Hz
  • Socket Type: Dual port CCS1 or NACS or CCS1 + NACS
  • Network Connections: LAN, 4G, Wi-Fi
  • Communication: OCPP1.6
  • Start Modes: Plug-n-play, RFID, OCPP and optional POS
  • Display: 15 inches LCD touchscreen

Dimensions

  • Width: 33.5″ / 850mm
  • Depth: 29.5″ / 750mm
  • Height: 78.7″ / 2000mm

EVDC-24ONA-BABA

EVDC-BABA Series

The EVESCO EVDC-2400NA-BABA is a 240 kW DC fast charging station engineered for high-demand public, commercial, and fleet applications. Powered by a 480V three-phase input, it delivers sustained high-output charging via CCS1 and NACS connectors, supporting both 400 V and 800 V + EV platforms. Fully certified to CTEP/NTEP standards and ADA-compliant, it meets strict national requirements for public accessibility and billing accuracy. With intelligent power distribution, the 240 kW BABA-compliant charger can simultaneously charge two vehicles at up to 120 kW each, maximizing site throughput and improving ROl without compromising performance. What sets the EVDC-240NA-BABA apart is it delivers full BABA-compliant electric vehicle charging, making it an ideal fit for federally funded infrastructure projects. Built to meet the requirements of the Build America, Buy America Act, this 240 kW EV charger qualifies for federal grants, tax credits, and clean energy incentives. By using U.S. sourced and assembled components, it streamlines public procurement, accelerates project timelines, and strengthens your position in competitive government bids, without compromising on charging performance or reliability.

Model Number: EVDC-240NA-BABA

  • 240 kW DC fast charging station with dual-connectors and cable-management
  • BABA-compliant construction qualifies for federal funding and supports U.S. manufacturing priorities
  • Delivers up to 350A of continuous current for fast, reliable EV charging performance
  • 200-1000 Vdc output range supports both 400V and 800V+ EV architectures
  • Certified to CTEP and NTEP standards for accurate public energy metering and billing
  • Available with CCS1, NACS, or dual-connector configurations for broad EV compatibility
  • Enables user access via RFID, QR code, OCPP, or optional credit card reader
  • 60Hz, 480VAC supply input (three-phase)

Model Number: EVDC-240NA-BABA

  • Output Power: 240kW
  • Output Voltage: 200-1000V
  • Output Current: 350A (0 – 350A variable range)
  • Supply Input: 480VAC three-phase / 60Hz
  • Socket Type: Dual port CCS1 or NACS or CCS1 + NACS
  • Network Connections: LAN, 4G, Wi-Fi
  • Communication: OCPP1.6
  • Start Modes: Plug-n-play, RFID, OCPP and optional POS
  • Display: 15 inches LCD touchscreen

Dimensions

  • Width: 33.5″ / 850mm
  • Depth: 29.5″ / 750mm
  • Height: 78.7″ / 2000mm

EVDC-8ONA-BABA

EVDC-BABA Series

The EVESCO EVDC-80NA-BABA is an 80 kW DC fast charging station that offers a flexible entry point for public, commercial, and fleet EV charging projects, without compromising on future growth. Built for 480V input and delivering sustained high-output performance, it supports ultra-fast charging through CCS1 and NACS connectors. Designed to meet CTEP/NTEP and ADA requirements, this unit is ideal for public charging installations, workplace charging, or fleet operations seeking reliable and robust infrastructure that aligns with national standards. What sets this model apart is its modular, upgrade-ready design. Starting at 80 kW, the charging station can be scaled up to 160 kW by adding 40 KW power modules, no major infrastructure changes required. Most importantly, it's a fully Build America, Buy America (BABA) compliant EV charging station, making it eligible for federal infrastructure funding and incentives. That means fewer procurement hurdles, faster approvals, and a stronger competitive edge for public-sector deployments.

Model Number: EVDC-80NA-BABA

  • Modular DC fast charging station starting at 80 kW, scalable up to 160 kW as needed
  • BABA-compliant construction qualifies for federal funding and supports U.S. manufacturing priorities
  • Delivers up to 350A of continuous current for fast, reliable EV charging performance
  • 200-1000 Vdc output range supports both 400V and 800V+ EV architectures
  • Certified to CTEP and NTEP standards for accurate public energy metering and billing
  • Available with CCS1, NACS, or dual-connector configurations for broad EV compatibility
  • Enables user access via RFID, QR code, OCPP, or optional credit card reader
  • 60Hz, 480VAC supply input (three-phase)

Model Number: EVDC-80NA-BABA

  • Output Power: 80kW
  • Output Voltage: 200-1000V
  • Output Current: 350A (0 – 350A variable range)
  • Supply Input: 480VAC three-phase / 60Hz
  • Socket Type: Dual port CCS1 or NACS or CCS1 + NACS
  • Network Connections: LAN, 4G, Wi-Fi
  • Communication: OCPP1.6
  • Start Modes: Plug-n-play, RFID, OCPP and optional POS
  • Display: 15 inches LCD touchscreen

Dimensions

  • Width: 22.8″ / 580mm
  • Depth: 33.5″ / 850mm
  • Height: 74.8″ / 1900mm
You need a price? A quote? Or have a questions? Click Here

return to top

Scroll to Top

Green Notions Global Renewable Energy Company

take a Look